Shopping Cart 0 items: £0.00

 x 

Your basket is currently empty

Products

TCR-ER32-20
20mm ER32 Collet

TCR-ER32-20
20mm ER32 Collet

£15.63
  + VAT
Tax amount: £3.13
£11.72
Lowest Price

 

ER32 Collets - HSD Spindles

How long a cutter lasts is often determined by the collet holding it. Poor quality collets can wear out quickly and often result in broken cutters and sometimes damage to the router itself. That's why we only supply one standard of collet - the best. Please Note: We do strongly recommend that all collets are inspected and cleaned every time a tool is changed and renewed every 3 to 4 months under normal operating conditions.

Recommended for
Tekcel VXR, VSR, EXR, EXL, E Series, Tornado F3, '09 V Series, all other CNC routers using ER32 style collets

(If the router you have is not listed, please contact us for advice.)

CCS-57269
20mm Length Knife Blade - Point Tip (Grub screw style)

CCS-57269
20mm Length Knife Blade - Point Tip (Grub screw style)

£37.34
  + VAT
Tax amount: £7.47
£28.01
Lowest Price

 

These CCS Single Sided Knife Blades are manufactured from high quality premium grade, solid carbide. Suitable for use on all paper & card based materials. CCS cutters deliver a super-sharp, crisp cut and can be used in either oscillating or fixed knife units. They produce great material yield along with excellent value for money.

Single Sided Knife Blade – Point Tip

Recommended for
Foamcore Board, Corrugated Board / Card, Cardboard, PVC Banner & Vinyl, Foam PVC sheet, Cork, Gasket, Rubber, Foam

(If the sheet material you want to machine is not listed, please contact us for advice)

CCS-57250
25mm Length Knife Blade - Point Tip (Grub screw style)

CCS-57250
25mm Length Knife Blade - Point Tip (Grub screw style)

£47.42
  + VAT
Tax amount: £9.48
£35.57
Lowest Price

 

These CCS Single Sided Knife Blades are manufactured from high quality premium grade, solid carbide. Suitable for use on all paper & card based materials. CCS cutters deliver a super-sharp, crisp cut and can be used in either oscillating or fixed knife units. They produce great material yield along with excellent value for money.

Single Sided Knife Blade – Point Tip

Recommended for
Foamcore Board, Corrugated Board / Card, Cardboard, PVC Banner & Vinyl, Foam PVC sheet, Cork, Gasket, Rubber, Foam

(If the sheet material you want to machine is not listed, please contact us for advice)

TBN-2
2mm Ball Nose

TBN-2
2mm Ball Nose

£35.79
  + VAT
Tax amount: £7.16
£26.84
Lowest Price

 

TBN Ball Nose Cutters are used for true 3D CNC machining, such as mould or model making. The solid carbide TBN cutters are designed to remove material in a sweeping action around a CAD/CAM defined 3D shape. The smaller the diameter of TBN cutter used, the finer the 3D detail that can be achieved. 

Twin Flute Ball Nose

Recommended for
Any sheet materials suitable for carving and 3D applications

(If the sheet material you want to machine is not listed, contact us for advice.)

RPL28 2-6-6
2mm Coated Carbide Cutter for SRBF / Reinforced Firbe Board on 6mm shank

RPL28 2-6-6
2mm Coated Carbide Cutter for SRBF / Reinforced Firbe Board

£36.80
  + VAT
Tax amount: £7.36
£27.60
Lowest Price

 

RPL28 end mill tools are manufactured from premium grade, solid carbide and have a special coating to deliver a longer cutting life when used to cut fibre reinforced plastics (SRBF) and certain glass reinforced plastics. The 6mm diameter shank format on the3mm and 4mm cutters delivers additional rigidity during the cutting process.

Recommended for
Fibre Reinforced Plastics such as SRBF (Synthetic Resin Bonded Fabric) and some Glass Reinforced Plastics (If the sheet material you want to machine is not listed, contact us for advice.)

 

PK30D 2-10-2
2mm diameter single flute down-spiral

PK30D 2-10-2
2mm diameter single flute down-spiral

£22.83
  + VAT
Tax amount: £4.57
£17.12
Lowest Price

 

PK30D single flute end mill tools are manufactured from premium grade, solid carbide and finished with a highly polished flute that delivers an equally polished performance across a wide range of sheet materials. Router operators looking to strike the right balance between great edge quality and longer tool life will really appreciate the premium performance offered by the PK30D range.

Down Spiral

Recommended for:
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates

(If the sheet material you want to machine is not listed, contact us for advice.)

WF50-D 2-10-2
2mm diameter single flute down-spiral

WF50-D 2-10-2
2mm diameter single flute down-spiral

£22.83
  + VAT
Tax amount: £4.57
£17.12
Lowest Price

 

Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.

Down Spiral

Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates

(If the sheet material you want to machine is not listed, contact us for advice.)

DA 2-6-6
2mm diameter Single Flute Up Spiral on 6mm shank

DA 2-6-6
2mm diameter Single Flute Up Spiral on 6mm shank

£22.62
  + VAT
Tax amount: £4.52
£16.34
Lowest Price

 

The DA Single Flute up spiral end mill range are manufactured from premium grade, solid carbide. These Single Flute cutters are dedicated for machining Aluminium and most non-ferrous metals and offer a great all round edge finish. Suitable for use on a wide variety of commonly routed metal based sheet materials. DA cutters deliver good material yield along with excellent value for money.

Up Spiral

Recommended for

*Aluminium, Brass, Copper, Non-Ferrous Metals

(*Use with TCC-01L CoolCut Metal Cutting Fluid)

PK30 2-10-2
2mm diameter single flute up-spiral

PK30 2-10-2
2mm diameter single flute up-spiral

£22.83
  + VAT
Tax amount: £4.57
£17.12
Lowest Price

 

PK30 single flute end mill tools are manufactured from premium grade, solid carbide and finished with a highly polished flute that delivers an equally polished performance across a wide range of sheet materials. Router operators looking to strike the right balance between great edge quality and longer tool life will really appreciate the premium performance offered by the PK30 range.

Up Spiral

Recommended for:
Acrylic, Aluminium, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG

(If the sheet material you want to machine is not listed, contact us for advice.)

WF50-U 2-10-2
2mm diameter single flute up-spiral

WF50-U 2-10-2
2mm diameter single flute up-spiral

£22.83
  + VAT
Tax amount: £4.57
£17.12
Lowest Price

 

Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50 tools have an upspiral flute action that helps draw swarf from the cutting area for a cleaner and faster cut. The best face finish will be achieved on the underside of the sheet material. 

Up Spiral

Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite

(If the sheet material you want to machine is not listed, contact us for advice.)

GP 2-10-6
2mm diameter single flute up-spiral on 6mm shank

GP 2-10-6
2mm diameter single flute up-spiral on 6mm shank

£18.88
  + VAT
Tax amount: £3.78
£14.16
Lowest Price

 

General purpose single flute end mill tools are manufactured from premium grade, solid carbide. The 6mm diameter shank format delivers additional rigidity and this style of cutter is popular with operators of manual tool change routers, as it minimises the number of different collets required. Suitable for on a wide variety of commonly routed sheet materials, GP cutters deliver ease of use and excellent value for money.

Up spiral

Recommended for
Acrylic, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG

(If the sheet material you want to machine is not listed, contact us for advice.)

 

TFS 2-6-6
2mm diameter Twin Flute Straight

TFS 2-6-6
2mm diameter Twin Flute Straight

£21.12
  + VAT
Tax amount: £4.22
£15.84
Lowest Price

 

The TFS Twin Flute straight end mill range are manufactured from premium grade, solid carbide. With two cutting sides and no spiral in action per revolution, these cutters offer a great all round edge finish with superb swarf evacuation. Suitable for use on a wide variety of commonly routed wood based and industrial plastic sheet materials. TFS cutters deliver good material yield along with excellent value for money.

Twin Flute Straight

Recommended for
MDF, Ply Wood, MFC, Chipboard, OSB, Hard / Soft Woods, Veneers, Laminates & PETG



Contact Us

  • Charwell House, Cheddar Business Park, Wedmore Road, Cheddar, Somerset, BS27 3EB
  • Telephone: +44 (0) 1934 742 186
  • E-mail: info@completecnc.co.uk

Search