Products
WF50-U 20-40-2020mm diameter single flute up-spiral
WF50-U 20-40-2020mm diameter single flute up-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50 tools have an upspiral flute action that helps draw swarf from the cutting area for a cleaner and faster cut. The best face finish will be achieved on the underside of the sheet material.
Up Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-U 18-35-1818mm diameter single flute up-spiral
WF50-U 18-35-1818mm diameter single flute up-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50 tools have an upspiral flute action that helps draw swarf from the cutting area for a cleaner and faster cut. The best face finish will be achieved on the underside of the sheet material.
Up Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 20-40-2020mm diameter single flute down-spiral
WF50-D 20-40-2020mm diameter single flute down-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-U 16-35-1616mm diameter single flute up-spiral
WF50-U 16-35-1616mm diameter single flute up-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50 tools have an upspiral flute action that helps draw swarf from the cutting area for a cleaner and faster cut. The best face finish will be achieved on the underside of the sheet material.
Up Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 18-35-1818mm diameter single flute down-spiral
WF50-D 18-35-1818mm diameter single flute down-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
TCR-ER32-2020mm ER32 Collet
TCR-ER32-2020mm ER32 Collet
ER32 Collets - HSD Spindles
How long a cutter lasts is often determined by the collet holding it. Poor quality collets can wear out quickly and often result in broken cutters and sometimes damage to the router itself. That's why we only supply one standard of collet - the best. Please Note: We do strongly recommend that all collets are inspected and cleaned every time a tool is changed and renewed every 3 to 4 months under normal operating conditions.
Recommended for
Tekcel VXR, VSR, EXR, EXL, E Series, Tornado F3, '09 V Series, all other CNC routers using ER32 style collets
(If the router you have is not listed, please contact us for advice.)
WF50-U 14-30-1414mm diameter single flute up-spiral
WF50-U 14-30-1414mm diameter single flute up-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50 tools have an upspiral flute action that helps draw swarf from the cutting area for a cleaner and faster cut. The best face finish will be achieved on the underside of the sheet material.
Up Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 16-35-1616mm diameter single flute down-spiral
WF50-D 16-35-1616mm diameter single flute down-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
TCR-ER32-1919mm ER32 Collet
TCR-ER32-1919mm ER32 Collet
ER32 Collets - HSD Spindles
How long a cutter lasts is often determined by the collet holding it. Poor quality collets can wear out quickly and often result in broken cutters and sometimes damage to the router itself. That's why we only supply one standard of collet - the best. Please Note: We do strongly recommend that all collets are inspected and cleaned every time a tool is changed and renewed every 3 to 4 months under normal operating conditions.
Recommended for
Tekcel VXR, VSR, EXR, EXL, E Series, Tornado F3, '09 V Series, all other CNC routers using ER32 style collets
(If the router you have is not listed, please contact us for advice.)
WF50-U 12-30-1212mm diameter single flute up-spiral
WF50-U 12-30-1212mm diameter single flute up-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50 tools have an upspiral flute action that helps draw swarf from the cutting area for a cleaner and faster cut. The best face finish will be achieved on the underside of the sheet material.
Up Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 14-30-1414mm diameter single flute down-spiral
WF50-D 14-30-1414mm diameter single flute down-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
TCR-ER32-1818mm ER32 Collet
TCR-ER32-1818mm ER32 Collet
ER32 Collets - HSD Spindles
How long a cutter lasts is often determined by the collet holding it. Poor quality collets can wear out quickly and often result in broken cutters and sometimes damage to the router itself. That's why we only supply one standard of collet - the best. Please Note: We do strongly recommend that all collets are inspected and cleaned every time a tool is changed and renewed every 3 to 4 months under normal operating conditions.
Recommended for
Tekcel VXR, VSR, EXR, EXL, E Series, Tornado F3, '09 V Series, all other CNC routers using ER32 style collets
(If the router you have is not listed, please contact us for advice.)