Products
DCT 3-6-63mm Diameter Twin Flute Coated End Mill
DCT 3-6-63mm Diameter Twin Flute Coated End Mill
The DCT Twin Flute up spiral end mill cutters are manufactured from superior grade solid carbide. These DCT Twin Flute cutters are specially coated with Tekcelex, a "Diamond Like Carbon" surface finish treatment, which is extremely hard wearing and very smooth. They offer a brilliant edge finish while maintaining sharper cutting edges, which in turn offers excellent material yield. These tools are recommended for machining Aluminium, most non-ferrous metals and Aluminium Composite Material (ACM). Also suitable for use on a wide variety of commonly routed metal based sheet materials.
Coated Up spiral
Recommended for:
*Aluminium, *Brass, *Copper, *Non-Ferrous Metals, Composites, Aluminium /Galvanised Steel/Mineral Core Composite Material
(*Use with TCC-01L CoolCut Metal Cutting Fluid)
(If the sheet material you want to machine is not listed, please contact us for advice)
DCT 4-8-64mm Diameter Twin Flute Coated End Mill
DCT 4-8-64mm Diameter Twin Flute Coated End Mill
The DCT Twin Flute up spiral end mill cutters are manufactured from superior grade solid carbide. These DCT Twin Flute cutters are specially coated with Tekcelex, a "Diamond Like Carbon" surface finish treatment, which is extremely hard wearing and very smooth. They offer a brilliant edge finish while maintaining sharper cutting edges, which in turn offers excellent material yield. These tools are recommended for machining Aluminium, most non-ferrous metals and Aluminium Composite Material (ACM). Also suitable for use on a wide variety of commonly routed metal based sheet materials.
Coated Up spiral
Recommended for:
*Aluminium, *Brass, *Copper, *Non-Ferrous Metals, Composites, Aluminium /Galvanised Steel /Mineral Core Composite Material
(*Use with TCC-01L CoolCut Metal Cutting Fluid)
(If the sheet material you want to machine is not listed, please contact us for advice)
DCT 6-10-66mm Diameter Twin Flute Coated End Mill
DCT 6-10-66mm Diameter Twin Flute Coated End Mill
The DCT Twin Flute up spiral end mill cutters are manufactured from superior grade solid carbide. These DCT Twin Flute cutters are specially coated with Tekcelex a "Diamond Like Carbon" surface finish treatment, which is extremely hard wearing and very smooth. They offer a brilliant edge finish while maintaining sharper cutting edges, which in turn offers excellent material yield. These tools are recommended for machining Aluminium, most non-ferrous metals and Aluminium Composite Material (ACM). Also suitable for use on a wide variety of commonly routed metal based sheet materials.
Coated Up spiral
Recommended for:
*Aluminium, *Brass, *Copper, *Non-Ferrous Metals, Composites, Aluminium /Galvanised Steel / Mineral Core Composite Material
(*Use with TCC-01L CoolCut Metal Cutting Fluid)
(If the sheet material you want to machine is not listed, please contact us for advice)
DCT 8-15-88mm Diameter Twin Flute Coated End Mill
DCT 8-15-88mm Diameter Twin Flute Coated End Mill
The DCT Twin Flute up spiral end mill cutters are manufactured from superior grade solid carbide. These DCT Twin Flute cutters are specially coated with Tekcelex, a "Diamond Like Carbon" surface finish treatment, which is extremely hard wearing and very smooth. They offer a brilliant edge finish while maintaining sharper cutting edges, which in turn offers excellent material yield. These tools are recommended for machining Aluminium, most non-ferrous metals and Aluminium Composite Material (ACM). Also suitable for use on a wide variety of commonly routed metal based sheet materials.
Coated Up spiral
Recommended for:
*Aluminium, *Brass, *Copper, *Non-Ferrous Metals, Composites, Aluminium /Galvanised Steel / Mineral Core Composite Material
(*Use with TCC-01L CoolCut Metal Cutting Fluid)
(If the sheet material you want to machine is not listed, please contact us for advice)