Products
WF50-D 1.5-6-31.5mm diameter single flute down-spiral on 3mm shank
WF50-D 1.5-6-31.5mm diameter single flute down-spiral on 3mm shank
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 1.5-10-31.5mm diameter single flute down-spiral on 3mm shank
WF50-D 1.5-10-31.5mm diameter single flute down-spiral on 3mm shank
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 2-10-22mm diameter single flute down-spiral
WF50-D 2-10-22mm diameter single flute down-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 3-12-33mm diameter single flute down-spiral
WF50-D 3-12-33mm diameter single flute down-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 4-15-44mm diameter single flute down-spiral
WF50-D 4-15-44mm diameter single flute down-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 4-20-64mm diameter single flute down-spiral on 6mm shank
WF50-D 4-20-64mm diameter single flute down-spiral on 6mm shank
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 5-16-55mm diameter single flute down-spiral
WF50-D 5-16-55mm diameter single flute down-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 5-16-65mm diameter single flute down-spiral on 6mm shank
WF50-D 5-16-65mm diameter single flute down-spiral on 6mm shank
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 5-28-65mm diameter single flute down-spiral on 6mm shank
WF50-D 5-28-65mm diameter single flute down-spiral on 6mm shank
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 6-20-66mm diameter single flute down-spiral
WF50-D 6-20-66mm diameter single flute down-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 6-30-66mm diameter single flute down-spiral
WF50-D 6-30-66mm diameter single flute down-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
WF50-D 6-35-66mm diameter single flute down-spiral
WF50-D 6-35-66mm diameter single flute down-spiral
Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.
Down Spiral
Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
25% OFF
25% OFF
