Products
DA 6-14-66mm diameter Single Flute Up Spiral
DA 6-14-66mm diameter Single Flute Up Spiral
The DA Single Flute up spiral end mill range are manufactured from premium grade, solid carbide. These Single Flute cutters are dedicated for machining Aluminium and most non-ferrous metals and offer a great all round edge finish. Suitable for use on a wide variety of commonly routed metal based sheet materials. DA cutters deliver good material yield along with excellent value for money.
Up Spiral
Recommended for
*Aluminium, Brass, Copper, Non-Ferrous Metals
(*Use with TCC-01L CoolCut Metal Cutting Fluid)
GP 6-20-66mm diameter single flute up-spiral
GP 6-20-66mm diameter single flute up-spiral
General purpose single flute end mill tools are manufactured from premium grade, solid carbide. The 6mm diameter shank format delivers additional rigidity and this style of cutter is popular with operators of manual tool change routers, as it minimises the number of different collets required. Suitable for on a wide variety of commonly routed sheet materials, GP cutters deliver ease of use and excellent value for money.
Up spiral
Recommended for
Acrylic, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG
(If the sheet material you want to machine is not listed, contact us for advice.)
PK30 3-12-33mm diameter single flute up-spiral
PK30 3-12-33mm diameter single flute up-spiral
PK30 single flute end mill tools are manufactured from premium grade, solid carbide and finished with a highly polished flute that delivers an equally polished performance across a wide range of sheet materials. Router operators looking to strike the right balance between great edge quality and longer tool life will really appreciate the premium performance offered by the PK30 range.
Up Spiral
Recommended for:
Acrylic, Aluminium, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG
(If the sheet material you want to machine is not listed, contact us for advice.)
PK30D 3-12-33mm diameter single flute down-spiral
PK30D 3-12-33mm diameter single flute down-spiral
PK30D single flute end mill tools are manufactured from premium grade, solid carbide and finished with a highly polished flute that delivers an equally polished performance across a wide range of sheet materials. Router operators looking to strike the right balance between great edge quality and longer tool life will really appreciate the premium performance offered by the PK30D range.
Down Spiral
Recommended for:
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates
(If the sheet material you want to machine is not listed, contact us for advice.)
PO15 6-25-66mm Twin Flute Straight
PO15 6-25-66mm Twin Flute Straight
Manufactured from high quality, solid carbide and available in an extensive range of tool diameters and cut lengths, PO15 straight flute cutters produce excellent results when used to cut or rout softer plastics and foams widely used in the sign, display, exhibition and case making industries.
Twin Flute Straight
Recommended for
Foam PVC Sheet, Rigid Sign Foam, Polystyrene, Block Foam, Zotefoam)
TBN-44mm Ball Nose
TBN-44mm Ball Nose
TBN Ball Nose Cutters are used for true 3D CNC machining, such as mould or model making. The solid carbide TBN cutters are designed to remove material in a sweeping action around a CAD/CAM defined 3D shape. The smaller the diameter of TBN cutter used, the finer the 3D detail that can be achieved.
Twin Flute Ball Nose
Recommended for
Any sheet materials suitable for carving and 3D applications
(If the sheet material you want to machine is not listed, contact us for advice.)
TCR-ER16-55mm ER16 Collet
TCR-ER16-55mm ER16 Collet
ER16 Collets - HSD Spindles
How long a cutter lasts is often determined by the collet holding it. Poor quality collets can wear out quickly and often result in broken cutters and sometimes damage to the router itself. That's why we only supply one standard of collet - the best. However, we do strongly recommend that collets are inspected and cleaned every time a tool is changed and renewed on a regular basis. Every 3-6 months under normal operating conditions.
Recommended for
E Series, Tornado F3, '09 V Series (If the router you have is not listed, contact us for advice.)
TCR-ER20-55mm ER20 Collet
TCR-ER20-55mm ER20 Collet
ER20 Collets - HSD Spindles
How long a cutter lasts is often determined by the collet holding it. Poor quality collets can wear out quickly and often result in broken cutters and sometimes damage to the router itself. That's why we only supply one standard of collet - the best. However, we do strongly recommend that collets are inspected and cleaned every time a tool is changed and renewed on a regular basis. Every 3-6 months under normal operating conditions.
Recommended for
E Series, Tornado F3, '09 V Series (If the router you have is not listed, contact us for advice.)
TCR-ER25-55mm ER25 Collet
TCR-ER25-55mm ER25 Collet
ER25 Collets - HSD Spindles
How long a cutter lasts is often determined by the collet holding it. Poor quality collets can wear out quickly and often result in broken cutters and sometimes damage to the router itself. That's why we only supply one standard of collet - the best. However, we do strongly recommend that collets are inspected and cleaned every time a tool is changed and renewed on a regular basis. Every 3-6 months under normal operating conditions.
Recommended for
E Series, Tornado F3, '09 V Series (If the router you have is not listed, contact us for advice.)
TCR-ER32-55mm ER32 Collet
TCR-ER32-55mm ER32 Collet
ER32 Collets - HSD Spindles
How long a cutter lasts is often determined by the collet holding it. Poor quality collets can wear out quickly and often result in broken cutters and sometimes damage to the router itself. That's why we only supply one standard of collet - the best. Please Note: We do strongly recommend that all collets are inspected and cleaned every time a tool is changed and renewed every 3 to 4 months under normal operating conditions.
Recommended for
Tekcel VXR, VSR, EXR, EXL, E Series, Tornado F3, '09 V Series, all other CNC routers using ER32 style collets
(If the router you have is not listed, please contact us for advice.)
TCR-VS55mm VS50-60 Collet
TCR-VS55mm VS50-60 Collet
VS50/60 Collets - Perske Spindles
How long a cutter lasts is often determined by the collet holding it. Poor quality collets can wear out quickly and often result in broken cutters and sometimes damage to the router itself. That's why we only supply one standard of collet - the best. However, we do strongly recommend that collets are inspected and cleaned every time a tool is changed and renewed on a regular basis. Every 3-6 months under normal operating conditions.
Recommended for
Perske 2.2Kw / 5.5Kw V Series, Sabre, AR6OO (If the router you have is not listed, contact us for advice.)
TF 4-9-64mm diameter Twin Flute up-spiral on 6mm shank
TF 4-9-64mm diameter Twin Flute up-spiral on 6mm shank
The TF Twin Flute up spiral end mill range are manufactured from premium grade, solid carbide. With two cutting sides in action per revolution, these cutters offer a great all round edge finish with superb swarf evacuation. Suitable for use on a wide variety of commonly routed sheet materials. TF cutters deliver good material yield along with excellent value for money.
Twin Flute Up-Spiral
Recommended for
Foam PVC Sheet, Industrial Plastics, Nylon, Polycarbonate, Polyethylene, PETG, ABS.
(If the sheet material you want to machine is not listed, please contact us for advice)