VP90 Chamfer – 2 Flute

VP90 chamfer tools are manufactured from premium grade, solid carbide. On a 6mm diameter shank, they will produce a high quality, 45 degree chamfer across a range of rigid sheet materials. This tool is particularly effective when used to put a subtle chamfer on cast acrylic. A chamfer depth of 2-3mm can be achieved.

Recommended for
Acrylic, Aluminium, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, MDF, Plywood & Hardwoods, Industrial Plastics, Polycarbonate / PTEG

(If the sheet material you want to machine is not listed, please contact us for advice.)

Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.

Down Spiral

Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates

(If the sheet material you want to machine is not listed, contact us for advice.)

These CCS Single Sided Knife Blades are manufactured from high quality premium grade, solid carbide. Suitable for use on all paper & card based materials. CCS cutters deliver a super-sharp, crisp cut and can be used in either oscillating or fixed knife units. They produce great material yield along with excellent value for money.

Single Sided Knife Blade – Point Tip

Recommended for
Foamcore Board, Corrugated Board / Card, Cardboard, PVC Banner & Vinyl, Foam PVC sheet, Cork, Gasket, Rubber, Foam

(If the sheet material you want to machine is not listed, please contact us for advice)

The CNC single flute end mill tools are manufactured from premium grade, solid carbide. These cutters are the same cut and shank diameter and offer great all round edge quality. Suitable for use on a wide variety of commonly routed sheet materials. CNC cutters deliver good material yield along with excellent value for money.

Up spiral

Recommended for
Acrylic, Aluminium, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG

(If the sheet material you want to machine is not listed, contact us for advice.)

General purpose single flute end mill tools are manufactured from premium grade, solid carbide. The 6mm diameter shank format delivers additional rigidity and this style of cutter is popular with operators of manual tool change routers, as it minimises the number of different collets required. Suitable for on a wide variety of commonly routed sheet materials, GP cutters deliver ease of use and excellent value for money.

Up spiral

Recommended for
Acrylic, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG

(If the sheet material you want to machine is not listed, contact us for advice.)

PK30 single flute end mill tools are manufactured from premium grade, solid carbide and finished with a highly polished flute that delivers an equally polished performance across a wide range of sheet materials. Router operators looking to strike the right balance between great edge quality and longer tool life will really appreciate the premium performance offered by the PK30 range.

Up Spiral

Recommended for:
Acrylic, Aluminium, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG

(If the sheet material you want to machine is not listed, contact us for advice)

Manufactured from high quality, solid carbide and available in an extensive range of tool diameters and cut lengths, PO15 straight flute cutters produce excellent results when used to cut or rout softer plastics and foams widely used in the sign, display, exhibition and case making industries.

Twin Flute Straight

Recommended for

Foam PVC Sheet, Rigid Sign Foam, Polystyrene, Block Foam, Zotefoam)

RPL28 end mill tools are manufactured from premium grade, solid carbide and have a special coating to deliver a longer cutting life when used to cut fibre reinforced plastics (SRBF) and certain glass reinforced plastics. The 6mm diameter shank format on the3mm and 4mm cutters delivers additional rigidity during the cutting process.

Recommended for
Fibre Reinforced Plastics such as SRBF (Synthetic Resin Bonded Fabric) and some Glass Reinforced Plastics (If the sheet material you want to machine is not listed, contact us for advice.)