Shopping Cart 0 items: £0.00

 x 

Your basket is currently empty

Products

CCS-57267
10mm Length Knife Blade - Point Tip (Grub screw style)

CCS-57267
10mm Length Knife Blade - Point Tip (Grub screw style)

£34.20
  + VAT
Tax amount: £6.84
£25.65
Lowest Price

 

These CCS Single Sided Knife Blades are manufactured from high quality premium grade, solid carbide. Suitable for use on all paper & card based materials. CCS cutters deliver a super-sharp, crisp cut and can be used in either oscillating or fixed knife units. They produce great material yield along with excellent value for money.

Single Sided Knife Blade – Point Tip

Recommended for
Foamcore Board, Corrugated Board / Card, Cardboard, PVC Banner & Vinyl, Foam PVC sheet, Cork, Gasket, Rubber, Foam

(If the sheet material you want to machine is not listed, please contact us for advice)

CNC 3-25-3
3mm dia single flute up-spiral long

CNC 3-25-3
3mm dia single flute up-spiral long

£25.85
  + VAT
Tax amount: £5.17
£19.39
Lowest Price

 

The CNC single flute end mill tools are manufactured from premium grade, solid carbide. These cutters are the same cut and shank diameter and offer great all round edge quality. They are also designed with a longer cut length for thicker material processing. Suitable for use on a wide variety of commonly routed sheet materials. CNC cutters deliver good material yield along with excellent value for money.

Up spiral

Recommended for
Acrylic, Aluminium, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG

(If the sheet material you want to machine is not listed, contact us for advice.)

DA 3-7-6
3mm diameter Single Flute Up Spiral on 6mm shank

DA 3-7-6
3mm diameter Single Flute Up Spiral on 6mm shank

£22.62
  + VAT
Tax amount: £4.52
£16.34
Lowest Price

 

The DA Single Flute up spiral end mill range are manufactured from premium grade, solid carbide. These Single Flute cutters are dedicated for machining Aluminium and most non-ferrous metals and offer a great all round edge finish. Suitable for use on a wide variety of commonly routed metal based sheet materials. DA cutters deliver good material yield along with excellent value for money.

Up Spiral

Recommended for

*Aluminium, Brass, Copper, Non-Ferrous Metals 

(*Use with TCC-01L CoolCut Metal Cutting Fluid)

FC135 V-Fold
135 degree 3mm flat folding cutter

FC135 V-Fold
135 degree 3mm flat folding cutter

£46.82
  + VAT
Tax amount: £9.36
£35.12
Lowest Price

 

FC135 degree carbide V folding tools are manufactured to specifications recommended by leading ACM producers. As a result, FC V Fold tools deliver perfectly folded returns for both ACM sign, display and architectural cladding applications.

135° V Fold 

Recommended for
Aluminium Composite Materials 

 

GP 3-12-6
3mm diameter single flute up-spiral on 6mm shank

GP 3-12-6
3mm diameter single flute up-spiral on 6mm shank

£18.88
  + VAT
Tax amount: £3.78
£14.16
Lowest Price

 

General purpose single flute end mill tools are manufactured from premium grade, solid carbide. The 6mm diameter shank format delivers additional rigidity and this style of cutter is popular with operators of manual tool change routers, as it minimises the number of different collets required. Suitable for on a wide variety of commonly routed sheet materials, GP cutters deliver ease of use and excellent value for money.

Up spiral

Recommended for
Acrylic, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG

(If the sheet material you want to machine is not listed, contact us for advice.)

PK30 1.5-10-3
1.5mm diameter single flute up-spiral on 3mm shank

PK30 1.5-10-3
1.5mm diameter single flute up-spiral on 3mm shank

£25.30
  + VAT
Tax amount: £5.06
£18.98
Lowest Price

 

PK30 single flute end mill tools are manufactured from premium grade, solid carbide and finished with a highly polished flute that delivers an equally polished performance across a wide range of sheet materials. Router operators looking to strike the right balance between great edge quality and longer tool life will really appreciate the premium performance offered by the PK30 range.

Up Spiral

Recommended for:
Acrylic, Aluminium, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG

(If the sheet material you want to machine is not listed, contact us for advice.)

PK30D 1.5-10-3
1.5mm diameter single flute down-spiral on 3mm shank

PK30D 1.5-10-3
1.5mm diameter single flute down-spiral on 3mm shank

£25.30
  + VAT
Tax amount: £5.06
£18.98
Lowest Price

 

PK30D single flute end mill tools are manufactured from premium grade, solid carbide and finished with a highly polished flute that delivers an equally polished performance across a wide range of sheet materials. Router operators looking to strike the right balance between great edge quality and longer tool life will really appreciate the premium performance offered by the PK30D range.

Down Spiral

Recommended for:
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates

(If the sheet material you want to machine is not listed, contact us for advice.)

PO15 4-25-6
4mm Twin Flute Straight on 6mm shank

PO15 4-25-6
4mm Twin Flute Straight on 6mm shank

£18.43
  + VAT
Tax amount: £3.69
£13.82
Lowest Price

 

Manufactured from high quality, solid carbide and available in an extensive range of tool diameters and cut lengths, PO15 straight flute cutters produce excellent results when used to cut or rout softer plastics and foams widely used in the sign, display, exhibition and case making industries.

Twin Flute Straight

Recommended for

Foam PVC Sheet, Rigid Sign Foam, Polystyrene, Block Foam, Zotefoam)

RPL28 3-12-6
3mm Coated Carbide Cutter for SRBF / Reinforced Firbe Board on 6mm shank

RPL28 3-12-6
3mm Coated Carbide Cutter for SRBF / Reinforced Firbe Board

£42.98
  + VAT
Tax amount: £8.60
£32.24
Lowest Price

 

RPL28 end mill tools are manufactured from premium grade, solid carbide and have a special coating to deliver a longer cutting life when used to cut fibre reinforced plastics (SRBF) and certain glass reinforced plastics. The 6mm diameter shank format on the3mm and 4mm cutters delivers additional rigidity during the cutting process.

Recommended for
Fibre Reinforced Plastics such as SRBF (Synthetic Resin Bonded Fabric) and some Glass Reinforced Plastics (If the sheet material you want to machine is not listed, contact us for advice.)

 

TBN-2
2mm Ball Nose

TBN-2
2mm Ball Nose

£35.79
  + VAT
Tax amount: £7.16
£26.84
Lowest Price

 

TBN Ball Nose Cutters are used for true 3D CNC machining, such as mould or model making. The solid carbide TBN cutters are designed to remove material in a sweeping action around a CAD/CAM defined 3D shape. The smaller the diameter of TBN cutter used, the finer the 3D detail that can be achieved. 

Twin Flute Ball Nose

Recommended for
Any sheet materials suitable for carving and 3D applications

(If the sheet material you want to machine is not listed, contact us for advice.)

TCR-ER16-3
3mm ER16 Collet

TCR-ER16-3
3mm ER16 Collet

£15.63
  + VAT
Tax amount: £3.13
£11.72
Lowest Price

 

ER16 Collets - HSD Spindles

How long a cutter lasts is often determined by the collet holding it. Poor quality collets can wear out quickly and often result in broken cutters and sometimes damage to the router itself. That's why we only supply one standard of collet - the best. However, we do strongly recommend that collets are inspected and cleaned every time a tool is changed and renewed on a regular basis. Every 3-6 months under normal operating conditions.

Recommended for
E Series, Tornado F3, '09 V Series (If the router you have is not listed, contact us for advice.)

TCR-ER20-3
3mm ER20 Collet

TCR-ER20-3
3mm ER20 Collet

£15.63
  + VAT
Tax amount: £3.13
£11.72
Lowest Price

 

ER20 Collets - HSD Spindles

How long a cutter lasts is often determined by the collet holding it. Poor quality collets can wear out quickly and often result in broken cutters and sometimes damage to the router itself. That's why we only supply one standard of collet - the best. However, we do strongly recommend that collets are inspected and cleaned every time a tool is changed and renewed on a regular basis. Every 3-6 months under normal operating conditions.

Recommended for
E Series, Tornado F3, '09 V Series (If the router you have is not listed, contact us for advice.)

Filter by

Contact Us

  • Charwell House, Cheddar Business Park, Wedmore Road, Cheddar, Somerset, BS27 3EB
  • Telephone: +44 (0) 1934 742 186
  • E-mail: info@completecnc.co.uk

Search