Shopping Cart 0 items: £0.00

 x 

Your basket is currently empty

Products

TF 3-7-6
3mm diameter Twin Flute up-spiral on 6mm shank

TF 3-7-6
3mm diameter Twin Flute up-spiral on 6mm shank

£25.31
  + VAT
Tax amount: £5.06
£18.29
Lowest Price

 

The TF Twin Flute up spiral end mill range are manufactured from premium grade, solid carbide. With two cutting sides in action per revolution, these cutters offer a great all round edge finish with superb swarf evacuation. Suitable for use on a wide variety of commonly routed sheet materials. TF cutters deliver good material yield along with excellent value for money.

Twin Flute Up-Spiral

Recommended for
Foam PVC Sheet, Industrial Plastics, Nylon, Polycarbonate, Polyethylene, PETG, ABS.


(If the sheet material you want to machine is not listed, please contact us for advice)

TFS 6-22-6
6mm diameter Twin Flute Straight

TFS 6-22-6
6mm diameter Twin Flute Straight

£27.36
  + VAT
Tax amount: £5.47
£19.77
Lowest Price

 

The TFS Twin Flute straight end mill range are manufactured from premium grade, solid carbide. With two cutting sides in action per revolution, these cutters offer a great all round edge finish with superb swarf evacuation. Suitable for use on a wide variety of commonly routed wood based sheet materials. TFS cutters deliver good material yield along with excellent value for money.

Twin Flute Straight

Recommended for
MDF, Ply Wood, MFC, Chipboard, OSB, Hard / Soft Woods, Veneers, Laminates



TFW 6-22-6
6mm diameter Twin Flute Up Spiral

TFW 6-22-6
6mm diameter Twin Flute Up Spiral

£29.57
  + VAT
Tax amount: £5.91
£21.36
Lowest Price

 

The TFW Twin Flute up-spiral end mill range are manufactured from premium grade, solid carbide. With two cutting sides in action per revolution, these cutters offer a great all round edge finish with superb swarf evacuation. Suitable for use on a wide variety of commonly routed wood based sheet materials. TFW cutters deliver good material yield along with excellent value for money.

Twin Flute Up Spiral

Recommended for
MDF, Ply Wood, MFC, Chipboard, OSB, Hard / Soft Woods, Veneers, Laminates

TVG130
130 degree 3D Carving, Bevelling and V Groove

TVG130
130 degree 3D Carving, Bevelling and V Groove

£39.29
  + VAT
Tax amount: £7.86
£29.47
Lowest Price

 

TVG V Groove cutters deliver a crisp, clean finish on a wide variety of sheet materials. TVG V Groove cutters are supplied on heavy duty 8mm shanks for a longer service life and are widely regarded as the best in the industry. Available in 90°, 120° and 130° this range complements any 3D CAD/CAM software that programs CNC routers to produce everything from straight forward bevels to the hand crafted appearance of carved or chiselled lettering.

V Groove

Recommended for

Any sheet materials suitable for carving or bevelling


(If the sheet material you want to machine is not listed, contact us for advice.)

WF50-D 3-12-3
3mm diameter single flute down-spiral

WF50-D 3-12-3
3mm diameter single flute down-spiral

£22.83
  + VAT
Tax amount: £4.57
£17.12
Lowest Price

 

Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50D tools feature a down spiral flute action that helps prevent the furring up and/or delamination of a finished or laminated surface. The best face finish will be achieved on the topside of the sheet.

 

Down Spiral

Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite, Vinyl Coated Media, Engraving Laminates

(If the sheet material you want to machine is not listed, contact us for advice.)

WF50-U 2-10-2
2mm diameter single flute up-spiral

WF50-U 2-10-2
2mm diameter single flute up-spiral

£22.83
  + VAT
Tax amount: £4.57
£17.12
Lowest Price

 

Single flute cutter technology is now widely used in conjunction with wood-based sheet products. WF50 tools have an upspiral flute action that helps draw swarf from the cutting area for a cleaner and faster cut. The best face finish will be achieved on the underside of the sheet material. 

Up Spiral

Recommended for
Hard/Softwood, MDF, Chipboard, Plywood, MFC, Solid Surface Resin Composite

(If the sheet material you want to machine is not listed, contact us for advice.)

CC800 12-35-12
12mm diameter Twin Flute Compression cutter

CC800 12-35-12
12mm diameter Twin Flute Compression cutter

£68.90
  + VAT
Tax amount: £13.78
£51.68
Lowest Price

 

CC800 Compression Cutters are manufactured from high quality, solid carbide and have both up and down spiral flute action. These tools are specifically designed to produce a first class face finish on both surfaces of sheet materials used in Shop Fitting, Exhibition Build, Kitchen & Cabinet making and Foam Convertors. A "Ramp" style entry plunge should be used and the centre of the CC800 cutter should align with the centre of the material to be most effective. The use of a sacrificial board is also essential.

Twin Flute Up/Down Cut

Recommended for

MDF, Plywood, Melamine-faced sheet materials, Veneered panels, Block Foam, Foam Inserts

CCS-57269
20mm Length Knife Blade - Point Tip (Grub screw style)

CCS-57269
20mm Length Knife Blade - Point Tip (Grub screw style)

£37.34
  + VAT
Tax amount: £7.47
£28.01
Lowest Price

 

These CCS Single Sided Knife Blades are manufactured from high quality premium grade, solid carbide. Suitable for use on all paper & card based materials. CCS cutters deliver a super-sharp, crisp cut and can be used in either oscillating or fixed knife units. They produce great material yield along with excellent value for money.

Single Sided Knife Blade – Point Tip

Recommended for
Foamcore Board, Corrugated Board / Card, Cardboard, PVC Banner & Vinyl, Foam PVC sheet, Cork, Gasket, Rubber, Foam

(If the sheet material you want to machine is not listed, please contact us for advice)

CNC 4-25-4
4mm dia single flute up-spiral long

CNC 4-25-4
4mm dia single flute up-spiral long

£26.22
  + VAT
Tax amount: £5.24
£19.67
Lowest Price

 

The CNC single flute end mill tools are manufactured from premium grade, solid carbide. These cutters are the same cut and shank diameter and offer great all round edge quality. They are also designed with a longer cut length for thicker material processing. Suitable for use on a wide variety of commonly routed sheet materials. CNC cutters deliver good material yield along with excellent value for money.

Up spiral

Recommended for
Acrylic, Aluminium, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG

(If the sheet material you want to machine is not listed, contact us for advice.)

DA 6-14-6
6mm diameter Single Flute Up Spiral

DA 6-14-6
6mm diameter Single Flute Up Spiral

£23.85
  + VAT
Tax amount: £4.77
£17.23
Lowest Price

 

The DA Single Flute up spiral end mill range are manufactured from premium grade, solid carbide. These Single Flute cutters are dedicated for machining Aluminium and most non-ferrous metals and offer a great all round edge finish. Suitable for use on a wide variety of commonly routed metal based sheet materials. DA cutters deliver good material yield along with excellent value for money.

Up Spiral

Recommended for

*Aluminium, Brass, Copper, Non-Ferrous Metals 

(*Use with TCC-01L CoolCut Metal Cutting Fluid)

GP 6-20-6
6mm diameter single flute up-spiral

GP 6-20-6
6mm diameter single flute up-spiral

£26.34
  + VAT
Tax amount: £5.27
£19.76
Lowest Price

 

General purpose single flute end mill tools are manufactured from premium grade, solid carbide. The 6mm diameter shank format delivers additional rigidity and this style of cutter is popular with operators of manual tool change routers, as it minimises the number of different collets required. Suitable for on a wide variety of commonly routed sheet materials, GP cutters deliver ease of use and excellent value for money.

Up spiral

Recommended for
Acrylic, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG

(If the sheet material you want to machine is not listed, contact us for advice.)

PK30 3-12-3
3mm diameter single flute up-spiral

PK30 3-12-3
3mm diameter single flute up-spiral

£22.83
  + VAT
Tax amount: £4.57
£17.12
Lowest Price

 

PK30 single flute end mill tools are manufactured from premium grade, solid carbide and finished with a highly polished flute that delivers an equally polished performance across a wide range of sheet materials. Router operators looking to strike the right balance between great edge quality and longer tool life will really appreciate the premium performance offered by the PK30 range.

Up Spiral

Recommended for:
Acrylic, Aluminium, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG

(If the sheet material you want to machine is not listed, contact us for advice.)

Filter by

Contact Us

  • Charwell House, Cheddar Business Park, Wedmore Road, Cheddar, Somerset, BS27 3EB
  • Telephone: +44 (0) 1934 742 186
  • E-mail: info@completecnc.co.uk

Search