Shopping Cart 0 items: £0.00

 x 

Your basket is currently empty

View

CC800DC 6-20-6
6mm diameter Twin Flute Compression cutter - coated

CC800DC 6-20-6
6mm diameter Twin Flute Compression cutter - coated

£38.45
  + VAT
Tax amount: £7.69
£28.84
Lowest Price

CC800DC Compression Cutters are manufactured from high quality, solid carbide and have both up and down spiral flute action. These CC800DC cutters are specially coated with Tekcelex, a "Diamond Like Carbon" surface finish treatment, which is extremely hard wearing and very smooth. They offer a brilliant edge finish while maintaining sharper cutting edges than uncoated tools, which in turn offers excellent material yield. These tools are specifically designed to produce a first class face finish on both surfaces of sheet materials used in Shop Fitting, Exhibition Build, Kitchen & Cabinet making and Foam Convertors. A "Ramp" style entry plunge should be used and the centre of the CC800DC cutter should align with the centre of the material to be most effective. The use of a sacrificial board is also essential.

Coated Twin Flute Up/Down Cut

Recommended for

MDF, MFC, Chipboard, OSB, Medite, Fire Retardant MDF, Plywood, Melamine-faced sheet materials, Veneered panels, Block Foam, Foam Inserts, Zotefoam™

CCS-57250
25mm Length Knife Blade - Point Tip (Grub screw style)

CCS-57250
25mm Length Knife Blade - Point Tip (Grub screw style)

£47.42
  + VAT
Tax amount: £9.48
£32.42
Lowest Price

 

These CCS Single Sided Knife Blades are manufactured from high quality premium grade, solid carbide. Suitable for use on all paper & card based materials. CCS cutters deliver a super-sharp, crisp cut and can be used in either oscillating or fixed knife units. They produce great material yield along with excellent value for money.

Single Sided Knife Blade – Point Tip

Recommended for
Foamcore Board, Corrugated Board / Card, Cardboard, PVC Banner & Vinyl, Foam PVC sheet, Cork, Gasket, Rubber, Foam

(If the sheet material you want to machine is not listed, please contact us for advice)

COR 01
Cutter for Correx Fluted material

COR 01
Cutter for Correx Fluted material

£28.57
  + VAT
Tax amount: £5.71
£21.43
Lowest Price

 

Based on a cutting process developed in house, COR 01 solid carbide cutters allow operators to CNC cut fluted polypropylene sheet materials such as Corex that have been traditionally regarded as too problematic to cut effectively with a CNC router.

Corex Cutter

Recommended for

Polypropylene sheet material - Corex 

CP 3-6-6
3mm diameter single flute up-spiral cut and polish

CP 3-6-6
3mm diameter single flute up-spiral cut and polish

£35.75
  + VAT
Tax amount: £7.15
£26.81
Lowest Price

 

The CP Polished Finish cutters is the product of a new manufacturing process that produces revolutionary results and extends tool life dramatically. CP cutters have been developed to deliver a superb, all round cutting performance and a high quality edge finish similar to that normally associated with parts that have undergone the additional time and expense of a secondary finishing process. CP cutters produce exceptional results and longer tool life cycles across a wide range of acrylics, plastics, polycarbonates and PVCs. 

Up Spiral

Recommended for
Acrylics, Polycarbonates, PVC Foamboards, Industrial Plastics

(If the sheet material you want to machine is not listed, contact us for advice.)

CP 4-8-6
4mm diameter single flute up-spiral cut and polish

CP 4-8-6
4mm diameter single flute up-spiral cut and polish

£35.75
  + VAT
Tax amount: £7.15
£26.81
Lowest Price

 

The CP Polished Finish cutters is the product of a new manufacturing process that produces revolutionary results and extends tool life dramatically. CP cutters have been developed to deliver a superb, all round cutting performance and a high quality edge finish similar to that normally associated with parts that have undergone the additional time and expense of a secondary finishing process. CP cutters produce exceptional results and longer tool life cycles across a wide range of acrylics, plastics, polycarbonates and PVCs. 

Up Spiral

Recommended for
Acrylics, Polycarbonates, PVC Foamboards, Industrial Plastics

(If the sheet material you want to machine is not listed, contact us for advice.)

CP 6-14-6
6mm diameter single flute up-spiral cut and polish

CP 6-14-6
6mm diameter single flute up-spiral cut and polish

£35.75
  + VAT
Tax amount: £7.15
£26.81
Lowest Price

 

The CP Polished Finish cutters is the product of a new manufacturing process that produces revolutionary results and extends tool life dramatically. CP cutters have been developed to deliver a superb, all round cutting performance and a high quality edge finish similar to that normally associated with parts that have undergone the additional time and expense of a secondary finishing process. CP cutters produce exceptional results and longer tool life cycles across a wide range of acrylics, plastics, polycarbonates and PVCs. 

Up Spiral

Recommended for
Acrylics, Polycarbonates, PVC Foamboards, Industrial Plastics

(If the sheet material you want to machine is not listed, contact us for advice.)

CPAL 3-6-6
3mm diameter single flute up-spiral cut and polish

CPAL 3-6-6
3mm diameter single flute up-spiral cut and polish

£35.75
  + VAT
Tax amount: £7.15
£26.81
Lowest Price

 

The CP-AL Polished Finish cutters is the product of a new manufacturing process that produces revolutionary results and extends tool life dramatically. CP-Al cutters have been developed to deliver a superb, all round cutting performance and a high quality edge finish similar to that normally associated with parts that have undergone the additional time and expense of a secondary finishing process. CP-AL cutters produce exceptional results and longer tool life cycles across a wide range of Aluminium Composite Materials, aluminium, brass and other non-ferrous metals.

Up spiral

Recommended for
*Aluminium, Brass, Copper, Non-Ferrous Metals and Aluminium Composite Material

(*Use with TCC-01L CoolCut Metal Cutting Fluid)

 

 

CPAL 4-8-6
4mm diameter single flute up-spiral cut and polish

CPAL 4-8-6
4mm diameter single flute up-spiral cut and polish

£35.75
  + VAT
Tax amount: £7.15
£26.81
Lowest Price

 

The CP-AL Polished Finish cutters is the product of a new manufacturing process that produces revolutionary results and extends tool life dramatically. CP-Al cutters have been developed to deliver a superb, all round cutting performance and a high quality edge finish similar to that normally associated with parts that have undergone the additional time and expense of a secondary finishing process. CP-AL cutters produce exceptional results and longer tool life cycles across a wide range of Aluminium Composite Materials, aluminium, brass and other non-ferrous metals.

Up spiral

Recommended for
*Aluminium, Brass, Copper, Non-Ferrous Metals and Aluminium Composite Material

(*Use with TCC-01L CoolCut Metal Cutting Fluid)

CPAL 6-14-6
6mm diameter single flute up-spiral cut and polish

CPAL 6-14-6
6mm diameter single flute up-spiral cut and polish

£35.75
  + VAT
Tax amount: £7.15
£26.81
Lowest Price

 

The CP-AL Polished Finish cutters is the product of a new manufacturing process that produces revolutionary results and extends tool life dramatically. CP-Al cutters have been developed to deliver a superb, all round cutting performance and a high quality edge finish similar to that normally associated with parts that have undergone the additional time and expense of a secondary finishing process. CP-AL cutters produce exceptional results and longer tool life cycles across a wide range of Aluminium Composite Materials, aluminium, brass and other non-ferrous metals.

Up spiral

Recommended for
*Aluminium, Brass, Copper, Non-Ferrous Metals and Aluminium Composite Material

(*Use with TCC-01L CoolCut Metal Cutting Fluid)

DCT 3-6-6
3mm Diameter Twin Flute Coated End Mill

DCT 3-6-6
3mm Diameter Twin Flute Coated End Mill

£48.55
  + VAT
Tax amount: £9.71
£36.41
Lowest Price

The DCT Twin Flute up spiral end mill cutters are manufactured from superior grade solid carbide. These DCT Twin Flute cutters are specially coated with Tekcelex, a "Diamond Like Carbon" surface finish treatment, which is extremely hard wearing and very smooth. They offer a brilliant edge finish while maintaining sharper cutting edges, which in turn offers excellent material yield. These tools are recommended for machining Aluminium, most non-ferrous metals and Aluminium Composite Material (ACM). Also suitable for use on a wide variety of commonly routed metal based sheet materials.

Coated Up spiral

Recommended for:

*Aluminium, *Brass, *Copper, *Non-Ferrous Metals, Composites, Aluminium /Galvanised Steel/Mineral Core Composite Material

(*Use with TCC-01L CoolCut Metal Cutting Fluid)

(If the sheet material you want to machine is not listed, please contact us for advice)

DCT 4-8-6
4mm Diameter Twin Flute Coated End Mill

DCT 4-8-6
4mm Diameter Twin Flute Coated End Mill

£48.55
  + VAT
Tax amount: £9.71
£36.41
Lowest Price

The DCT Twin Flute up spiral end mill cutters are manufactured from superior grade solid carbide. These DCT Twin Flute cutters are specially coated with Tekcelex, a "Diamond Like Carbon" surface finish treatment, which is extremely hard wearing and very smooth. They offer a brilliant edge finish while maintaining sharper cutting edges, which in turn offers excellent material yield. These tools are recommended for machining Aluminium, most non-ferrous metals and Aluminium Composite Material (ACM). Also suitable for use on a wide variety of commonly routed metal based sheet materials.

Coated Up spiral

Recommended for:

*Aluminium, *Brass, *Copper, *Non-Ferrous Metals, Composites, Aluminium /Galvanised Steel /Mineral Core Composite Material

(*Use with TCC-01L CoolCut Metal Cutting Fluid)

(If the sheet material you want to machine is not listed, please contact us for advice)

DCT 6-10-6
6mm Diameter Twin Flute Coated End Mill

DCT 6-10-6
6mm Diameter Twin Flute Coated End Mill

£46.92
  + VAT
Tax amount: £9.38
£35.19
Lowest Price

The DCT Twin Flute up spiral end mill cutters are manufactured from superior grade solid carbide. These DCT Twin Flute cutters are specially coated with Tekcelex a "Diamond Like Carbon" surface finish treatment, which is extremely hard wearing and very smooth. They offer a brilliant edge finish while maintaining sharper cutting edges, which in turn offers excellent material yield. These tools are recommended for machining Aluminium, most non-ferrous metals and Aluminium Composite Material (ACM). Also suitable for use on a wide variety of commonly routed metal based sheet materials.

Coated Up spiral

Recommended for:

*Aluminium, *Brass, *Copper, *Non-Ferrous Metals, Composites, Aluminium /Galvanised Steel / Mineral Core Composite Material

(*Use with TCC-01L CoolCut Metal Cutting Fluid)

(If the sheet material you want to machine is not listed, please contact us for advice)

ET20-0-45-6
3 Flute point Tip Engraver

ET20-0-45-6
3 Flute point Tip Engraver

£35.45
  + VAT
Tax amount: £7.09
£19.50
Lowest Price

 

ET20 engraver tools are designed for use with collet-loaded CNC routers, to engrave, clean out or key line the surface of a wide range of plastics, metals and woods. With engraving tips or 'flats' ranging from 0 to 0.75mm, ET20 engravers are manufactured from high quality solid carbide and supplied on 6mm shanks for a longer service life and ease of use.

3 Flute Point Tip Engraver

Recommended for

Any sheet materials suitable for engraving

ET20-0.25-6-51
0.25mm Diameter Flat Tip Engraver

ET20-0.25-6-51
0.25mm Diameter Flat Tip Engraver

£19.04
  + VAT
Tax amount: £3.81
£14.28
Lowest Price

 

ET20 engraver tools are designed for use with collet-loaded CNC routers, to engrave, clean out or key line the surface of a wide range of plastics, metals and woods. With engraving point tips or 'flats' ranging from 0mm to 0.75mm, ET20 engravers are manufactured from high quality solid carbide and supplied on 6mm shanks for a longer service life and ease of use.

Flat Tip Engraver

Recommended for

Any sheet materials suitable for engraving

 

ET20-0.50-6-51
0.50mm Diameter Flat Tip Engraver

ET20-0.50-6-51
0.50mm Diameter Flat Tip Engraver

£19.04
  + VAT
Tax amount: £3.81
£14.28
Lowest Price

 

ET20 engraver tools are designed for use with collet-loaded CNC routers, to engrave, clean out or key line the surface of a wide range of plastics, metals and woods. With engraving Point tips or 'flats' ranging from 0mm to 0.75mm, ET20 engravers are manufactured from high quality solid carbide and supplied on 6mm shanks for a longer service life and ease of use.

Flat Tip Engraver

Recommended for

Any sheet materials suitable for engraving

ET20-0.75-6-51
0.75mm Diameter Flat Tip Engraver

ET20-0.75-6-51
0.75mm Diameter Flat Tip Engraver

£19.04
  + VAT
Tax amount: £3.81
£14.28
Lowest Price

 

ET20 engraver tools are designed for use with collet-loaded CNC routers, to engrave, clean out or key line the surface of a wide range of plastics, metals and woods. With engraving Point tips or 'flats' ranging from 0mm to 0.75mm, ET20 engravers are manufactured from high quality solid carbide and supplied on 6mm shanks for a longer service life and ease of use.

Flat Tip Engraver

Recommended for

Any sheet materials suitable for engraving

SS40 3-4-6
3mm diameter Stainless Steel Cutter

SS40 3-4-6
3mm diameter Stainless Steel Cutter

£28.73
  + VAT
Tax amount: £5.75
£21.55
Lowest Price

 

Stainless steel is one of the hardest sheet materials to cut on a CNC router. SS40 tools are manufactured from premium grade, solid carbide and finished with a protective coating. When used in accordance with guidance from Complete CNC Solutions, SS40 tools will cut thin stainless steel up to 3mm thick. The use of a mist coolant device is essential in the stainless steel cutting process. 

3 Flute Up Spiral

Recommended for
*Stainless Steel, Solid Surface Composite, Avonite & Corian

(*Use with TCC-01L CoolCut Metal Cutting Fluid

SS40 4-5-6
4mm diameter Stainless Steel Cutter

SS40 4-5-6
4mm diameter Stainless Steel Cutter

£31.07
  + VAT
Tax amount: £6.21
£23.30
Lowest Price

 

Stainless steel is one of the hardest sheet materials to cut on a CNC router. SS40 tools are manufactured from premium grade, solid carbide and finished with a protective coating. When used in accordance with guidance from Complete CNC Solutions, SS40 tools will cut thin stainless steel up to 3mm thick. The use of a mist coolant device is essential in the stainless steel cutting process. 

3 Flute Up Spiral

Recommended for
*Stainless Steel, Solid Surface Composite, Avonite & Corian

(*Use with TCC-01L CoolCut Metal Cutting Fluid

SS40 6-7-6
6mm diameter Stainless Steel Cutter

SS40 6-7-6
6mm diameter Stainless Steel Cutter

£32.31
  + VAT
Tax amount: £6.46
£24.23
Lowest Price

 

Stainless steel is one of the hardest sheet materials to cut on a CNC router. SS40 tools are manufactured from premium grade, solid carbide and finished with a protective coating. When used in accordance with guidance from Complete CNC Solutions, SS40 tools will cut thin stainless steel up to 3mm thick. The use of a mist coolant device is essential in the stainless steel cutting process. 

3 Flute Up Spiral

Recommended for
*Stainless Steel, Solid Surface Composite, Avonite & Corian

(*Use with TCC-01L CoolCut Metal Cutting Fluid

VP90-Chamfer Tool
90 degree V Point Bevelling

VP90-Chamfer Tool
90 degree V Point Bevelling

£36.60
  + VAT
Tax amount: £7.32
£27.45
Lowest Price

VP90 Chamfer – 2 Flute

VP90 chamfer tools are manufactured from premium grade, solid carbide. On a 6mm diameter shank, they will produce a high quality, 45 degree chamfer across a range of rigid sheet materials. This tool is particularly effective when used to put a subtle chamfer on cast acrylic. A chamfer depth of 2-3mm can be achieved.

Recommended for
Acrylic, Aluminium, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, MDF, Plywood & Hardwoods, Industrial Plastics, Polycarbonate / PTEG

(If the sheet material you want to machine is not listed, please contact us for advice.)

 

 

CC800 6-20-6
6mm diameter Twin Flute Compression cutter

CC800 6-20-6
6mm diameter Twin Flute Compression cutter

£27.32
  + VAT
Tax amount: £5.46
£20.49
Lowest Price

 

CC800 Compression Cutters are manufactured from high quality, solid carbide and have both up and down spiral flute action. These tools are specifically designed to produce a first class face finish on both surfaces of sheet materials used in Shop Fitting, Exhibition Build, Kitchen & Cabinet making and Foam Convertors. A "Ramp" style entry plunge should be used and the centre of the CC800 cutter should align with the centre of the material to be most effective. The use of a sacrificial board is also essential.

Twin Flute Up/Down Cut

Recommended for

MDF, Plywood, Melamine-faced sheet materials, Veneered panels, Block Foam, Foam Inserts

CCS-57275
6mm Length Knife Blade - Point Tip (Grub screw style)

CCS-57275
6mm Length Knife Blade - Point Tip (Grub screw style)

£32.21
  + VAT
Tax amount: £6.44
£24.16
Lowest Price

 

These CCS Single Sided Knife Blades are manufactured from high quality premium grade, solid carbide. Suitable for use on all paper & card based materials. CCS cutters deliver a super-sharp, crisp cut and can be used in either oscillating or fixed knife units. They produce great material yield along with excellent value for money.

Single Sided Knife Blade – Point Tip

Recommended for
Foamcore Board, Corrugated Board / Card, Cardboard, PVC Banner & Vinyl, Foam PVC sheet, Cork, Gasket, Rubber, Foam

(If the sheet material you want to machine is not listed, please contact us for advice)

DA 2-6-6
2mm diameter Single Flute Up Spiral on 6mm shank

DA 2-6-6
2mm diameter Single Flute Up Spiral on 6mm shank

£22.62
  + VAT
Tax amount: £4.52
£16.34
Lowest Price

 

The DA Single Flute up spiral end mill range are manufactured from premium grade, solid carbide. These Single Flute cutters are dedicated for machining Aluminium and most non-ferrous metals and offer a great all round edge finish. Suitable for use on a wide variety of commonly routed metal based sheet materials. DA cutters deliver good material yield along with excellent value for money.

Up Spiral

Recommended for

*Aluminium, Brass, Copper, Non-Ferrous Metals

(*Use with TCC-01L CoolCut Metal Cutting Fluid)

GP 2-10-6
2mm diameter single flute up-spiral on 6mm shank

GP 2-10-6
2mm diameter single flute up-spiral on 6mm shank

£18.88
  + VAT
Tax amount: £3.78
£14.16
Lowest Price

 

General purpose single flute end mill tools are manufactured from premium grade, solid carbide. The 6mm diameter shank format delivers additional rigidity and this style of cutter is popular with operators of manual tool change routers, as it minimises the number of different collets required. Suitable for on a wide variety of commonly routed sheet materials, GP cutters deliver ease of use and excellent value for money.

Up spiral

Recommended for
Acrylic, Aluminium Composite Material, Brass / Non Ferrous Metals, Foam PVC Sheet, Industrial Plastics, Polycarbonate / PETG

(If the sheet material you want to machine is not listed, contact us for advice.)

 

Filter by

Contact Us

  • Charwell House, Cheddar Business Park, Wedmore Road, Cheddar, Somerset, BS27 3EB
  • Telephone: +44 (0) 1934 742 186
  • E-mail: info@completecnc.co.uk

Search